Brian Meyer NMRA Real Street


About NitroStang
Monthly Sales Specials
Transmissions
Bellhousings
Clutches
Intakes
Throttle Bodies
Nitrous
Computer Chips and Products
Good Used Parts
This site has been hit
16641 times from
1484 valued customers.

TREMEC T56

 

This six-speed overdrive transmission was developed for adaptation to a wide range of vehicle requirements. Currently, the TREMEC T-56 is being used on the Dodge Viper, Chevy Corvette Z06, Ford SVT Mustang Cobra, Aston Martin DB7 Vantage and V12 Vanquish, and Holden Commodore and Monaro. 

Features:

  • Center Distance - 85 mm
  • Double overdrive provides extended ratio coverage and allows for closer ratio steps
  • Aluminum die cast housings for reduced weight
  • Tapered roller bearings on main and countershafts reduce noise and improve durability
  • Needle bearing under all speed gears improve high speed performance and reduce shift effort
  • Advanced synchronizer technology
    • Powdered steel core blocker rings
    • Engineered friction materials for improved durability
    • Multiple cone synchronizer design for lower shift effort and increased capacity
    • Patented strut-type synchronizer design for improved durability
  • Constant mesh synchronized reverse
  • Internal, single-rail shift system
  • Integral clutch adaptor with front cover end-loading design for increased driveline bending strength and greater application adaptability
  • Multiple shift lever locations
     

    1386-000-011 T56 GM450 FT PD
    BELL HOSING NOT INCLUDED
    2.97 1st Gear, 2.07 2nd gear, 1.43 3rd Gear, 1.1 4th Gear,.80 5th Gear, .62 6th Gear
    RETAIL 3163.15YOUR PRICE 2595.00 ***
     
    1386-000-012 T56 FORD 5.0L450 FT PD
    2.97 1st Gear, 2.07 2nd Gear, 1.43 3rd Gear, 1.1 4th Gear, .80 5th Gear, .62 6th Gear
    RETAIL 3163.15YOUR PRICE2595.00
     
    1386-000-016 T56 GM F-BODY 93-97 450 FT PD
    2.66 1st Gear, 1.78 2nd Gear, 1.30 3rd Gear, 1.1 4th Gear, .74 5th Gear, .50 6th Gear
    RETAIL 3224.65YOUR PRICE 2595.00
     
    1386-000-017 T56 GM F-BODY 1998450 FT PD
    2.66 1st Gear, 1.78 2nd Gear, 1.30 3rd Gear, 1.1 4th Gear, .74 5th Gear, .50 6th Gear
    RETAIL 3224.65YOUR PRICE 2595.00
     
    1386-000-020 T56 GM F-BODY 1999450 FT PD
    2.66 1st Gear, 1.78 2nd Gear, 1.30 3rd Gear, 1.1 4th Gear, .74 5th Gear, .50 6th Gear
    RETAIL 3298.45YOUR PRICE 2595.00
     
    1386-000-023 T56 GM CORVETTE C5375 FT PD
    2.66 1st Gear, 1.78 2nd Gear, 1.30 3rd Gear, 1.1 4th Gear, .74 5th Gear, .50 6th Gear
    RETAIL 3774.05YOUR PRICE 2595.00
     
    TUET1259T56 FORD 4.6 MECH SPEEDO 450 FT PD
    2.97 1st Gear, 2.07 2nd Gear, 1.43 3rd Gear, 1.1 4th Gear, .80 5th Gear, .62 6th Gear
    RETAIL 3618.25YOUR PRICE 2595.00
     
    TUET1260 T56 FORD 4.6 ELEC SPEEDO450 FT PD
    2.97 1st Gear, 2.07 2nd Gear, 1.43 3rd Gear, 1.1 4th Gear, .80 5th Gear, .62 6th Gear
    RETAIL 3618.25YOUR PRICE 2595.00
     
    TUET1452 T56 GM CORVETTE C5385 FT PD
    2.66 1st Gear, 1.78 2nd Gear, 1.30 3rd Gear, 1.1 4th Gear, .74 5th Gear, .50 6th Gear
    RETAIL 3741.25YOUR PRICE2595.00
     
    GM/VIPER T56 TRANSMISSIONS
    650 lb-ft Torque Capacity
  • 1.125 x 26T GM Input Spline

  • 30T Viper Output Spline

  • Close Ratio w/ Deep Overdrives(2.66/1.78/1.30/1.00/.74/.50)

  • Carbon Fibre Blocker Rings

  • Steel 3-4 Shift Fork

  • Precision built and blueprinted by D$D technicians

  • Direct bolt-up to GM Saginaw/Muncie/T10 bell housings

  • Direct bolt-up to McLeod 8630 series steel bell housings

  • Accepts stock GM clutches,linkage,T.O.B.,pilot bearing,trans. mount

  • 7T GM Mechanical Speedo Drive or Electronic Speedo Drive
  • AVAILABLE WITH MECHANICAL OR ELECTRONIC SPEEDOMETER
     
    CONTACT US DIRECTLY FOR VIPER SPEC TRANSMISSION PRICES

    RECONDITIONED T56 4.6 03/04 STYLE $1789.00* Exchanged

    PMP T56 2.66 1ST GEAR 10SPL IN 27SPL OUT 400HP 5.0 OR 4.6

    $2250.00* Exchanged

    PMP T56 hd2.66 1ST GEAR 26SPL IN 27SPL OUT 750 HP  5.0 OR 4.6

    $2590.00* Exchanged

    NEW PMP T56 FORD OR GM

    2.66/2.97 1ST GEAR

    800 HP 26 SPL IN 31 SPL OUT

    26 SPLINE INPUT SHAFT, STEEL 3/4 SHIFT FORK, 3RD METAL SPACER, BIG ENG. ON 2ND, H/D 1/2 3/4 KEYWAY KIT, CARBON FIBRE SYNCROS AND H/D THROW OUT BEARING TUBE

    $3350.00

    Please note that there may be other parts needed for the Install:Depending on Application, we can help you out with all of your needs
     
    Clutch
    Fluid
    Crossmember Relocation Kit
    Driveshaft
    Speedometer Cable (If Applicable)
    Aftermarket Clutch Quadrant and Firewall Adjuster
     *** NOTE---1386-000-011 TRANSMISSION DOES NOT INCLUDE BELL HOUSING AND REQUIRES CUSTOM MODIFICATION FOR INSTALL.***
     
     
     *Exhchanged Core Decription* Remanufactured Transmissions require the Identical Transmission to be returned for core fee. Fee is $350.00 for T56 Transmissions. Upon receipt of return and inspection, Full or Partial refund will be applied.
     
     
     
     
     

       

       



    SPECIAL PRICES AVAILABLE ON ALL TRANSMISSION PACKAGES


T5 | T45 | TKO | Custom | T56

Payment Options
Manufacturers
Other Cars
Links
Affiliates


Disclaimers & Warranties

This site is hosted by
email Savage Web Services